IEC | INDONESIA EXPORT CENTER
Your Global Sourcing Partner
Understanding PFAD with a Minimum 90% Free Fatty Acid Reference
Free Fatty Acid (FFA) content is one of the most important parameters when evaluating Palm Fatty Acid Distillate for industrial use.
Buyers involved in biodiesel manufacturing, oleochemical processing, fatty acid ester production, and industrial chemical procurement frequently use FFA specifications to screen potential feedstocks.
The IEC PFAD product brochure identifies minimum 90% FFA, expressed as palmitic acid, as its reference target.
This is a proposed product characteristic, not confirmation that any particular shipment has been tested or is currently available.
Indonesia Export Center (IEC) facilitates inquiries involving potential Indonesian PFAD suppliers and helps buyers communicate their technical requirements.
What Does FFA 90 Percent Mean?
FFA refers to free fatty acids present in a fatty material.
A specification of minimum 90% FFA means the product is expected to meet or exceed the stated free fatty acid requirement when tested using the agreed analytical method and reporting basis.
The numerical result should not be interpreted as a guarantee that the product consists of 90% pure palmitic acid.
PFAD contains a mixture of fatty acids and potentially other constituents.
Why “As Palmitic” Matters
FFA is commonly determined through titration and may be expressed using a reference fatty acid.
Different reporting bases can produce different numerical values for the same analytical result.
The IEC reference explicitly uses FFA as Palmitic.
Buyers should therefore confirm the reporting basis before comparing quotations or COAs.
For example, a result reported as oleic acid should not be treated as numerically identical to a result reported as palmitic acid.
PFAD Reference Specification
| Parameter | IEC Reference |
|---|---|
| FFA, as Palmitic | Minimum 90% |
| Moisture & Impurities | Maximum 1.0% |
| Iodine Value | Maximum 50 |
| Melting Point | 36–46°C |
| Colour (Gardner) | Maximum 7 |
| Appearance | White / Off White Solid |
Actual results depend on the offered material and must be verified.
Why FFA Is Important for Industrial Buyers
Biodiesel Production
High-FFA materials may be relevant to processes designed to convert free fatty acids into esters.
The production technology must be compatible with the feedstock.
Oleochemical Manufacturing
FFA content helps characterize the raw material and may influence feedstock selection, pretreatment, and conversion planning.
Fatty Acid Ester Production
The amount and composition of free fatty acids can influence the raw material’s suitability for esterification.
Commodity Procurement
A clearly defined FFA requirement helps buyers compare supplier offers using consistent technical criteria.
FFA Is Not the Only Quality Parameter
A product may satisfy the minimum FFA requirement while failing other important specifications.
Buyers should also evaluate:
- Moisture.
- Insoluble impurities.
- Iodine value.
- Fatty acid composition.
- Melting behavior.
- Colour.
- Process-relevant contaminants.
A single FFA percentage does not establish suitability for every industrial application.
FFA vs Acid Value
FFA percentage and acid value are related analytical measures, but they are not identical expressions.
Acid value is commonly reported as the amount of potassium hydroxide required to neutralize acidic constituents in a defined mass of sample.
FFA percentage depends on the reporting basis used.
When evaluating both parameters, buyers should ensure that the laboratory methods and calculations are understood.
Why PFAD FFA Can Vary
Differences in PFAD quality may arise from:
- Incoming palm oil characteristics.
- Refinery operating conditions.
- Feedstock handling.
- Distillation conditions.
- Product blending.
- Storage and shipment history.
Consequently, buyers should not assume that all PFAD from Indonesia has the same FFA level.
How to Verify a Minimum 90% FFA Requirement
Step 1 – Define the Specification
State minimum 90% FFA as palmitic acid, if that is the required contractual target.
Step 2 – Specify the Analytical Method
Agree on the method to be used for measurement.
Step 3 – Request a Relevant COA
Obtain a report linked to the proposed product or lot.
Step 4 – Confirm Sampling Procedures
Ensure the sample is representative of the material being purchased.
Step 5 – Arrange Independent Testing Where Appropriate
Use an agreed laboratory or inspection provider.
Step 6 – Establish Acceptance Procedures
Define how results and any disputes will be handled.
Example Technical Purchase Requirement
Product: Palm Fatty Acid Distillate
FFA: Minimum 90.0%, expressed as palmitic acid.
Moisture & Impurities: Maximum 1.0%.
Iodine Value: Maximum 50.
Melting Point: 36–46°C, using an agreed method.
Gardner Colour: Maximum 7.
Appearance: White / Off White Solid.
Quality Determination: By representative sampling and mutually agreed laboratory testing.
This is an illustrative specification schedule based on the IEC brochure, not a completed supply contract.
Supplier Questions for FFA 90% PFAD
- Is the offered material PFAD?
- Is the stated FFA result expressed as palmitic acid?
- What analytical method was used?
- Is a recent COA available?
- Does the sample represent the offered cargo?
- Are moisture and impurities reported separately?
- Is a fatty acid composition report available?
- Can independent testing be arranged?
- What volume can be confirmed?
- What are the proposed delivery terms?
RFQ Template
Subject: PFAD Minimum 90% FFA – Indonesian Supplier Inquiry
Company: [Company Name]
Country: [Country]
Product: Palm Fatty Acid Distillate
FFA Requirement: Minimum 90%, as Palmitic
Moisture & Impurities: Maximum 1.0%
Iodine Value: Maximum 50
Melting Point: 36–46°C
Gardner Colour: Maximum 7
Required Quantity: [MT]
Monthly Demand: [MT]
Application: [Details]
Destination Port: [Port]
Preferred Incoterm: [Term]
Required Shipment Period: [Dates]
Please provide the relevant specification sheet, recent COA, available supply information, and quotation requirements.
Frequently Asked Questions
Does PFAD FFA 90% mean 90% palmitic acid?
No. The specification expresses total free fatty acidity on a palmitic acid reporting basis.
Is all PFAD minimum 90% FFA?
No. Actual quality varies.
Can a COA expressed as oleic acid be compared directly?
Not without accounting for the reporting basis and analytical method.
Does higher FFA always mean better quality?
No. Quality depends on the buyer’s intended application and complete specification.
Can buyers request independent testing?
Yes, where agreed.
Does IEC guarantee PFAD with 90% FFA?
No. IEC provides a reference specification and facilitates supplier inquiries.
Request PFAD FFA 90 Percent Supplier Information
Looking for Indonesian PFAD with a defined high-FFA specification?
Submit your technical requirements, volume, and destination for potential supplier evaluation.
REQUEST PFAD FFA 90% QUOTATION
IEC | INDONESIA EXPORT CENTER
Website: https://indonesiaexportcenter.com/
WhatsApp: +62 813-3302-277
Related Resources
PFAD COA and Quality Verification
