Split Areca Nut B2B Specifications Template – Grading, Particle Size and Quality Inspection

IEC | INDONESIA EXPORT CENTER

Split Areca Nut Technical Data | Sorting Specifications | Supplier Quality Verification

Technical Specifications for Split Areca Nut Procurement

International procurement teams evaluating a split areca nut specification sheet need clear criteria for product identity, cut type, size distribution, moisture, foreign matter, visible defects, and batch acceptance.

Split areca nut is derived from Areca catechu. Its physical characteristics depend on the original material and the cutting, drying, sorting, and handling processes.

Indonesia Export Center (IEC) facilitates technical inquiries with potential Indonesian suppliers.

This template is intended to help buyers prepare a specification for supplier discussion. It does not represent verified product availability or certified test results.

Product Identification

Field Required Information
Product Name Split Areca Nut
Alternative Name Pinang Belah
Botanical Name Areca catechu
Origin Indonesia
Physical Form Dried split
Cut Type Buyer-defined
Processing Condition Supplier-confirmed
Grade Agreed criteria
Intended Lawful Use Buyer-declared
Supplier To verify
Lot Number To assign

Split Types and Physical Characteristics

Buyers should identify the exact form required.

Potential descriptive categories include:

  • Halved nuts.
  • Irregular split pieces.
  • Size-sorted split material.
  • Other specified cut forms.

These are procurement descriptions, not guaranteed supplier grades.

Particle Size and Piece Distribution

The required size distribution should be expressed using measurable criteria.

Depending on the material, buyers may specify piece dimensions or a suitable sieve-based method.

A specification should identify the measurement method and allowable proportions outside the target range.

Proposed Technical Specification

Parameter Buyer Requirement Supplier Result
Botanical Identity Areca catechu To confirm
Origin Indonesia To confirm
Product Form Dried split To confirm
Cut Type Defined To confirm
Piece-Size Distribution Agreed range To measure
Moisture Buyer-defined To test
Color Agreed visual standard To inspect
Foreign Matter Defined maximum To inspect
Fine Material Agreed tolerance To measure
Irregular Pieces Agreed tolerance To inspect
Visible Mold Rejection criteria To inspect
Pest Condition Agreed criteria To inspect
Relevant Contaminants Risk-based limits To test
Packaging Buyer-defined To confirm
Lot Traceability Required as appropriate To verify

Sorting and Cleanliness

Split material may contain pieces of varying sizes and physical conditions.

The supplier should explain its sorting methods and how unwanted foreign material is controlled.

Buyers should distinguish between acceptable size variation and material that fails the agreed specification.

Moisture Testing

The preliminary marketing material mentions 15–20% moisture, but this is not a verified batch specification or universal standard.

Buyers should establish the appropriate target and analytical method.

Moisture testing should be conducted on representative samples from the relevant lot.

Defect Classification

Potential defect categories include:

  1. Excessively small pieces.
  2. Unwanted broken fragments.
  3. Foreign material.
  4. Discoloration outside the agreed criteria.
  5. Visible mold.
  6. Pest damage.
  7. Material inconsistent with the specified product.

The buyer and supplier should define measurable tolerances and rejection conditions.

Contamination Assessment

Visual cleanliness does not prove that a lot is free from mycotoxins or other contaminants.

Testing requirements should reflect the intended lawful application, material risks, and destination regulations.

Sample Approval

Before commercial procurement, buyers should establish a documented sample approval procedure.

The approved sample should be identified by date, supplier, product form, and lot reference where available.

The seller should clarify whether the sample represents a particular commercial lot or a general product category.

Packaging Requirements

Packaging Item Buyer Specification
Outer Packaging To define
Inner Liner If appropriate
Net Weight To specify
Package Label Product and lot
Origin Identification As required
Moisture Protection To assess
Palletization If required
Container Arrangement To agree

Inspection and Acceptance Procedure

The purchase contract should establish the sampling method, test procedures, acceptable tolerances, inspection timing, and process for disputed results.

Where appropriate, an independent inspection provider may be appointed.

Supplier Documentation

Potential records include a product specification sheet, lot-specific laboratory results, grading information, packing records, origin documentation, and export documents.

These records should be requested rather than assumed available.

Health and Import Compliance

Areca nut chewing is carcinogenic to humans.

Splitting, sorting, or drying the material does not remove the established health risks.

Importers must verify destination restrictions and permitted end use.

Frequently Asked Questions

Is split areca nut the same as sliced areca nut?

Not necessarily. The physical form and cutting method should be defined.

Is there one universal split grade?

No universal commercial grade terminology should be assumed.

Can buyers specify particle-size distribution?

Yes, subject to supplier capability and an agreed measurement method.

Does lower moisture guarantee absence of contamination?

No.

Can IEC coordinate technical specification inquiries?

IEC can facilitate communication with potential suppliers.

Are specific grades guaranteed in stock?

No.

Request Split Areca Nut Technical Information

IEC welcomes inquiries from qualified procurement teams seeking technical documentation and supplier information.

REQUEST SPLIT ARECA NUT SPECIFICATION INFORMATION

INDONESIA EXPORT CENTER

Website: https://indonesiaexportcenter.com/

WhatsApp: +62 813-3302-277

Related Technical Guides

Split Areca Nut Supplier Indonesia

Areca Nut Size and Defect Inspection

Dried Areca Nut B2B Specifications Template

 

Leave a Reply

Your email address will not be published. Required fields are marked *