IEC | INDONESIA EXPORT CENTER

CONNECTING INDONESIAN PRODUCTS TO THE WORLD

COCONUT OIL PRODUCT RANGE | PREMIUM INDONESIAN EXPORT PRODUCTS

Source Coconut Fatty Acid Distillate for Malaysia

Looking for a CFAD supplier Malaysia procurement solution for your oleochemical or industrial processing requirements?

Coconut Fatty Acid Distillate (CFAD) is a coconut-oil-derived, fatty-acid-rich material that may be evaluated for suitable oleochemical, fatty acid processing, and other industrial applications.

For buyers in Malaysia, selecting an overseas CFAD source requires careful attention to technical specifications, product consistency, packaging, shipping arrangements, and import documentation.

IEC | Indonesia Export Center facilitates sourcing and export enquiries for Indonesian Coconut Fatty Acid Distillate, helping Malaysian industrial buyers request supplier information, technical documentation, and bulk commercial quotations.

Whether you are evaluating a trial order or planning recurring industrial procurement, IEC welcomes enquiries from Malaysian oleochemical manufacturers, chemical processors, industrial distributors, and commodity traders.

Request CFAD specifications and a quotation for delivery to Malaysia.

WhatsApp: +62 813-3302-277

Website: https://indonesiaexportcenter.com/

Actual manufacturer, available quantity, MOQ, packaging, COA, shipment feasibility, and certifications must be verified before purchase.

CFAD Reference Specifications for Malaysian Buyers

The following figures are supplied reference specifications for Coconut Fatty Acid Distillate.

Technical Parameter	Reference Specification
Free Fatty Acid as Lauric	60% (Min)
Iodine Value (Wijs)	15 (Max)
Moisture & Impurities	0.5% (Max)

These values are reference specification limits, not verified analytical results for a specific production lot.

Malaysian buyers should request a current manufacturer-issued technical specification and lot-specific Certificate of Analysis (COA).

CFAD Malaysia Procurement Overview

Item	Information
Product	Coconut Fatty Acid Distillate
Abbreviation	CFAD
Product Category	Coconut-Oil-Derived Industrial Raw Material
Proposed Sourcing Country	Indonesia
Target Destination	Malaysia
Primary Buyers	Oleochemical Buyers
Other Buyers	Chemical Manufacturers, Industrial Importers, Commodity Traders
Reference FFA as Lauric	60% (Min)
Reference Iodine Value	15 (Max)
Reference Moisture & Impurities	0.5% (Max)
Fatty Acid Composition	To Be Verified
Acid Value	To Be Tested
Saponification Value	To Be Tested
Unsaponifiable Matter	To Be Tested
Manufacturer	To Be Verified
Lot-Specific COA	To Be Requested and Verified
Safety Data Sheet	To Be Requested and Verified
Packaging	To Be Confirmed
MOQ	To Be Confirmed
Available Quantity	To Be Confirmed
Destination Port	Buyer to Specify
Price per MT	Request Quotation
Shipment Lead Time	To Be Confirmed

Why Malaysian Oleochemical Buyers Evaluate Indonesian CFAD

Indonesia is a relevant country to consider when exploring coconut-derived industrial raw materials.

For Malaysian buyers, an Indonesian CFAD sourcing enquiry may provide an opportunity to evaluate alternative suppliers and compare technical and commercial terms.

However, supplier suitability must be verified individually.

Key Procurement Considerations

• Actual manufacturer identity
• Product specifications
• Fatty acid composition
• Lot-to-lot quality consistency
• Packaging compatibility
• Available quantity
• Commercial pricing
• Export documentation
• Shipping arrangements
• Malaysian import requirements

IEC can receive sourcing enquiries and help buyers request relevant information from potential suppliers.

No specific IEC CFAD shipment history to Malaysia is claimed on this page.

What Is Coconut Fatty Acid Distillate?

Coconut Fatty Acid Distillate is a fatty-acid-rich material associated with coconut oil refining.

Depending on the actual manufacturing process, CFAD may contain:

• Free fatty acids
• Residual neutral oil or glycerides
• Unsaponifiable constituents
• Moisture
• Other minor components

CFAD is different from refined coconut oil and should be evaluated according to its actual industrial composition.

CFAD Technical Acceptance for Malaysia

Before approving CFAD for industrial use, Malaysian buyers should establish clear acceptance criteria.

Free Fatty Acid Content

The supplied reference specification is:

FFA as Lauric: 60% Minimum

This expresses free fatty acid content using lauric acid as the reporting basis.

It does not establish the actual percentage of lauric acid in the material.

Iodine Value

The supplied reference specification is:

Iodine Value (Wijs): 15 Maximum

Iodine value provides information about the degree of unsaturation.

Moisture and Impurities

The supplied reference specification is:

Moisture & Impurities: 0.5% Maximum

Moisture and impurities may affect storage, handling, and processing.

Additional Parameters

Depending on the application, buyers may also request:

• Fatty acid composition
• Acid value
• Saponification value
• Unsaponifiable matter
• Residual neutral oil
• Other process-specific characteristics

No verified values for these additional parameters have been supplied.

CFAD Fatty Acid Composition for Malaysian Oleochemical Plants

Fatty acid composition may be important for downstream manufacturing.

Depending on the application, buyers may request analysis of:

• Caprylic acid (C8:0)
• Capric acid (C10:0)
• Lauric acid (C12:0)
• Myristic acid (C14:0)
• Palmitic acid (C16:0)
• Stearic acid (C18:0)
• Oleic acid (C18:1)
• Linoleic acid (C18:2)

Why Composition Matters

The actual fatty acid profile can influence:

• Feedstock suitability
• Process compatibility
• Product recovery
• Downstream product quality
• Batch consistency

No verified GC fatty acid distribution has been supplied for the proposed CFAD.

CFAD Certificate of Analysis for Malaysia

A lot-specific COA is an important document for technical procurement.

Recommended COA Parameters

Parameter	Reference Limit	Actual Result
FFA as Lauric	60% (Min)	To Be Verified
Iodine Value (Wijs)	15 (Max)	To Be Verified
Moisture & Impurities	0.5% (Max)	To Be Verified
Acid Value	Buyer to Specify	To Be Tested
Saponification Value	Buyer to Specify	To Be Tested
Unsaponifiable Matter	Buyer to Specify	To Be Tested
Fatty Acid Composition	Buyer to Specify	To Be Verified

COA Verification Checklist

• Manufacturer or laboratory identity
• Product name
• Lot or batch number
• Sampling or testing date
• Analytical methods
• Actual results
• Units of measurement
• Specification limits
• Authorized approval

A generic specification sheet should not be treated as a lot-specific COA.

CFAD Shipping from Indonesia to Malaysia

Shipping arrangements depend on the actual supplier location, packaging format, cargo characteristics, and buyer’s receiving facility.

Potential Malaysian Destination Ports

Examples of ports that buyers may consider include:

• Port Klang
• Port of Tanjung Pelepas
• Penang Port
• Johor Port
• Kuantan Port

These are illustrative destination options, not verified CFAD shipping routes or available services.

Actual routing and port suitability must be confirmed with the freight forwarder and carrier.

Shipping Details to Confirm

• Indonesian origin port
• Malaysian destination port
• Cargo packaging
• Net shipment quantity
• Transport classification
• Carrier acceptance
• Freight cost
• Estimated transit time
• Customs documentation
• Destination handling requirements

CFAD Packaging Options for Malaysian Buyers

Potential packaging arrangements may include:

Industrial Drums

Drums may be considered where compatible and available.

Intermediate Bulk Containers

IBCs may be considered for suitable cargo, subject to supplier capability.

ISO Tank or Other Bulk Arrangements

Tank-based shipping may be evaluated according to product characteristics and transport requirements.

Flexitank

Flexitank suitability requires verification of product eligibility, packaging compatibility, and carrier approval.

Packaging Information to Request

• Packaging material
• Net weight
• Gross weight
• Closure system
• Temperature requirements
• Storage recommendations
• Loading configuration
• Transport suitability

No specific packaging option has been verified as available.

FOB, CFR and CIF Quotations for Malaysia

Malaysian buyers may request quotations using appropriate Incoterms.

FOB Indonesia

The seller delivers the goods on board the nominated vessel at the named Indonesian port.

CFR Malaysia

The seller arranges and pays for carriage to the named Malaysian destination port, while risk generally transfers when the goods are on board the vessel at the port of shipment.

CIF Malaysia

The seller arranges and pays for carriage and the insurance required by the CIF rule to the named destination port, while risk generally transfers when the goods are on board at the shipment port.

Important for Containerized Cargo

FCA may be more suitable than FOB when containerized cargo is handed over to a carrier or terminal before vessel loading.

Buyers should confirm the actual delivery point and appropriate Incoterm before finalizing the contract.

CFAD Import Requirements in Malaysia

Import requirements depend on the actual product identity, classification, intended use, and applicable Malaysian regulations.

Buyers should verify requirements with their customs broker and relevant Malaysian authorities.

Areas to Review

• Customs tariff classification
• Import documentation
• Applicable duties and taxes
• Chemical regulatory obligations
• Product safety documentation
• Transport classification
• Packaging and labeling
• Any applicable permits or approvals

No specific HS code, duty rate, or import permit requirement is asserted on this page.

CFAD Quality and Supply Consistency

For Malaysian industrial processors, predictable feedstock quality can be important for production planning.

However, quality consistency must be demonstrated through actual supplier records.

Recommended Verification

1. Request current technical specifications.
2. Obtain lot-specific COAs.
3. Review analytical methods.
4. Compare results across multiple lots where available.
5. Request samples if needed.
6. Conduct laboratory or pilot trials where appropriate.
7. Confirm recurring supply capability.
8. Establish agreed acceptance criteria.

A single COA does not establish long-term quality consistency.

CFAD MOQ, Pricing and Availability for Malaysia

Minimum Order Quantity

No fixed MOQ has been verified.

Price per Metric Ton

Current pricing should be requested through a formal quotation.

Available Quantity

Actual stock and production capacity must be confirmed.

Recurring Supply

Buyers may request scheduled deliveries, subject to verified manufacturer capability.

Shipment Lead Time

Production and shipment schedules must be confirmed for each order.

CFAD Malaysia Procurement Checklist

Before placing an order, verify:

• Actual manufacturer identity

• Manufacturing location

• Product identity as CFAD

• Intended industrial application

• Current technical specification

• Lot-specific COA

• FFA as Lauric result

• Iodine value result

• Moisture and impurities result

• Additional test results, if required

• Safety Data Sheet

• Packaging compatibility

• MOQ

• Available quantity

• Price per MT

• Currency

• Indonesian origin port

• Malaysian destination port

• Requested Incoterm

• Freight quotation

• Production lead time

• Shipment lead time

• Payment terms

• Quotation validity

• Malaysian import requirements

• Contractual seller and exporter of record

Request for Quotation – CFAD Supply to Malaysia

Subject: RFQ – Coconut Fatty Acid Distillate Supply to Malaysia

Dear IEC | Indonesia Export Center Team,

We are interested in sourcing Coconut Fatty Acid Distillate from Indonesia for industrial use in Malaysia.

Please advise whether a suitable manufacturer can provide CFAD meeting our technical and commercial requirements.

BUYER INFORMATION

Company Name: [Company Name] Country: Malaysia
Business Type: [Oleochemical Manufacturer / Chemical Processor / Industrial Distributor / Commodity Trader] Contact Person: [Name] Email: [Email] WhatsApp: [Number]

PRODUCT REQUIREMENTS

Product: Coconut Fatty Acid Distillate (CFAD)
Intended Application: [Specify] Required Quantity: [MT] Order Frequency: [Trial / One-Time / Monthly / Other]

REFERENCE SPECIFICATIONS

Parameter	Required Value
Free Fatty Acid as Lauric	60% (Min)
Iodine Value (Wijs)	15 (Max)
Moisture & Impurities	0.5% (Max)
Fatty Acid Composition	[Specify / Request Analysis]
Acid Value	[Specify if required]
Saponification Value	[Specify if required]
Unsaponifiable Matter	[Specify if required]
Other Parameters	[Specify]

DOCUMENTATION REQUESTED

Please provide, where available:

1. Manufacturer legal name and facility location
2. Current CFAD technical specification
3. Lot-specific COA
4. Safety Data Sheet
5. Fatty acid composition
6. Packaging specifications
7. Storage and handling recommendations
8. Sample availability
9. Relevant export documentation details

SHIPPING REQUIREMENTS

Preferred Packaging: [Specify] Required Quantity: [MT] Destination Country: Malaysia
Destination Port: [Port Klang / Tanjung Pelepas / Penang / Johor / Kuantan / Other] Requested Incoterm: [FCA / FOB / CFR / CIF / CIP / Other] Target Shipment Period: [Month / Year]

Please advise:

• Minimum order quantity
• Available quantity
• Price per MT
• Currency
• Packaging options
• Indonesian origin port
• Estimated freight cost
• Production lead time
• Estimated shipment lead time
• Payment terms
• Quotation validity
• Recurring supply capability

We will review the technical documents and applicable Malaysian import requirements before confirming a purchase.

Thank you. We look forward to your quotation and supporting documentation.

Kind regards,

[Your Name] [Company Name] Malaysia

SEND YOUR CFAD MALAYSIA ENQUIRY VIA WHATSAPP

https://wa.me/628133302277

Frequently Asked Questions – CFAD Supplier Malaysia

1. Can Malaysian buyers source CFAD from Indonesia?

Malaysian buyers can enquire about potential Indonesian CFAD sourcing, subject to supplier availability and applicable import requirements.

2. What is CFAD used for?

CFAD may be evaluated for suitable oleochemical, fatty acid processing, soap manufacturing, and other industrial applications.

3. What is the supplied CFAD FFA specification?

60% minimum, expressed as Lauric.

4. Does 60% FFA as Lauric mean 60% lauric acid?

No. It is a free fatty acid reporting basis, not a direct measurement of lauric acid composition.

5. What is the supplied iodine value specification?

15 maximum, using the Wijs method.

6. What is the supplied moisture and impurities limit?

0.5% maximum.

7. Can Malaysian buyers request a lot-specific COA?

Yes. Actual availability must be confirmed.

8. Can buyers request fatty acid composition testing?

Yes. Availability must be confirmed with the supplier.

9. Can CFAD be shipped to Port Klang?

Buyers may request Port Klang as a destination, subject to freight and shipment feasibility.

10. Can CFAD be shipped to Johor?

Buyers may request a suitable Johor destination port, subject to confirmation.

11. Can Malaysian buyers request CIF quotations?

Yes. Feasibility and commercial terms must be confirmed for the named destination port.

12. What packaging options are available?

Potential options may include drums, IBCs, or suitable bulk arrangements. Actual availability must be verified.

13. What is the minimum order quantity?

No fixed MOQ has been verified.

14. Can Malaysian buyers request recurring bulk supply?

Yes. Feasibility depends on verified manufacturer capacity and commercial arrangements.

15. Does IEC have verified CFAD shipment history or stock for Malaysia?

No specific shipment history or stock availability has been independently verified for this page.

Request CFAD Supply and Export Quotation for Malaysia

Selecting a CFAD supplier Malaysia sourcing arrangement requires careful evaluation of product quality, technical documentation, shipment feasibility, packaging, and Malaysian import requirements.

For Malaysian oleochemical manufacturers and industrial importers, the most important procurement considerations include traceable COA results, suitable feedstock composition, transparent commercial terms, and verified supply capability.

IEC | Indonesia Export Center welcomes enquiries from Malaysia for potential Indonesian Coconut Fatty Acid Distillate sourcing and export quotations.

IEC | INDONESIA EXPORT CENTER

CONNECTING INDONESIAN PRODUCTS TO THE WORLD

Product: Coconut Fatty Acid Distillate (CFAD)

Product Category: Coconut-Oil-Derived Industrial Raw Material

Proposed Sourcing Country: Indonesia

Target Destination: Malaysia

Target Buyers: Oleochemical Manufacturers, Industrial Importers, Chemical Processors, and Commodity Traders

Reference FFA as Lauric: 60% (Min)

Reference Iodine Value: 15 (Max)

Reference Moisture & Impurities: 0.5% (Max)

Fatty Acid Composition: To Be Verified

Manufacturer: To Be Verified

Lot-Specific COA: To Be Requested and Verified

Safety Data Sheet: To Be Requested and Verified

Certifications: To Be Verified

MOQ: To Be Confirmed

Available Quantity: To Be Confirmed

Packaging: To Be Confirmed

Destination Port: Buyer to Specify

Price per MT: Request Quotation

Shipment Lead Time: To Be Confirmed

Request CFAD Specifications and Bulk Quotation for Malaysia

Website: https://indonesiaexportcenter.com/

WhatsApp: +62 813-3302-277

REQUEST CFAD SUPPLY QUOTATION FOR MALAYSIA

Contact us for specifications, quotations, and export inquiries.

Technical and Commercial Disclaimer: This page provides general technical and sourcing information about potential Coconut Fatty Acid Distillate supply from Indonesia to Malaysia. The numerical values shown are supplied reference specifications, not actual lot-specific COA results. No specific manufacturer, certification, COA, SDS, stock, MOQ, packaging configuration, price, production capacity, shipment route, or shipment lead time has been independently verified. Malaysia is a target market for enquiries, not evidence of verified shipment history. Technical suitability, transport classification, and Malaysian import requirements must be assessed for the actual product and transaction. IEC facilitates sourcing and export enquiries; the actual manufacturer, contractual seller, and exporter of record must be confirmed for each order.