IEC | INDONESIA EXPORT CENTER
Technical Procurement | Product Specifications | Quality Control | Supplier Documentation
Dried Areca Nut Technical Specifications for International Buyers
A clear dried areca nut specification sheet helps international buyers communicate measurable quality requirements and evaluate supplier offers consistently.
For dried whole areca nut, the technical specification should identify the botanical material, physical form, moisture requirements, grading criteria, contamination controls, packaging, and testing procedures.
Indonesia Export Center (IEC) facilitates inquiries with potential Indonesian suppliers and helps buyers organize the technical information required for procurement.
The following template is intended for buyer–supplier discussion. It is not a verified Certificate of Analysis, product certification, or guarantee of available specifications.
Product Identification
| Field | Proposed Information |
|---|---|
| Product Name | Dried Areca Nut |
| Alternative Name | Pinang Kering |
| Botanical Name | Areca catechu |
| Country of Origin | Indonesia |
| Physical Form | Whole dried |
| Husk Condition | To be specified |
| Grade | Buyer and supplier to agree |
| Intended Lawful Use | Buyer to declare |
| Supplier | To be verified |
| Lot Number | To be assigned |
| Document Version | To be recorded |
Physical Characteristics
Appearance
The material should be described according to its actual condition.
Buyers may establish criteria for shape, surface appearance, color, and visible defects.
Size Distribution
The specification should define the required size range and measurement procedure.
A supplier’s use of the term large, medium, or small does not provide a sufficient technical standard without measurable criteria.
Foreign Matter
The buyer should establish a maximum acceptable amount of material that does not belong to the specified product.
Visible Mold and Pest Condition
Inspection criteria should address visible mold, insect damage, and signs of infestation.
Visual inspection cannot establish the absence of mycotoxins or all biological contaminants.
Technical Specification Table
| Parameter | Buyer Target | Supplier Result | Test Method |
|---|---|---|---|
| Botanical Identity | Areca catechu | To confirm | Appropriate identification |
| Product Form | Whole dried | To confirm | Visual inspection |
| Moisture | Buyer-defined | To test | Agreed method |
| Size Distribution | Buyer-defined | To measure | Agreed measurement |
| Color | Buyer-defined | To inspect | Visual reference |
| Foreign Matter | Buyer-defined limit | To inspect | Agreed procedure |
| Broken Material | Buyer-defined limit | To inspect | Agreed procedure |
| Visible Mold | Rejection criteria | To inspect | Visual inspection |
| Pest Condition | Acceptance criteria | To inspect | Appropriate inspection |
| Relevant Contaminants | Risk-based limits | To test | Suitable laboratory method |
| Net Weight | Buyer-defined | To verify | Weighing |
| Packaging | Agreed format | To confirm | Packing inspection |
No numerical quality limits should be represented as supplier-confirmed until supported by appropriate evidence.
Moisture Content
The preliminary product description identifies a moisture range of 15–20%.
This should be treated as an unverified reference rather than an established specification.
The buyer should agree with the supplier on:
- Target moisture content.
- Maximum permitted value.
- Sampling method.
- Analytical method.
- Reporting basis.
- Laboratory or testing provider.
- Procedure for resolving disputes.
Sampling Requirements
A representative sampling plan should account for lot size, package count, material variability, and the intended tests.
Sampling procedures should be documented so that inspection results can be linked to the relevant commercial lot.
Contamination and Quality Risks
Depending on the material and intended lawful use, relevant testing may include moisture and selected contaminants.
The required scope should be established through a risk assessment and applicable regulations.
A supplier’s statement that material is clean and dry does not replace testing.
Packaging Specification
| Packaging Field | Buyer Requirement |
|---|---|
| Packaging Material | To specify |
| Inner Liner | If appropriate |
| Net Weight per Package | To specify |
| Gross Weight | To verify |
| Package Dimensions | To confirm |
| Lot Label | Required where applicable |
| Origin Marking | According to requirements |
| Moisture Protection | To assess |
| Palletization | If required |
| Container Loading | Agreed procedure |
Storage and Transportation
Storage conditions should protect the material from contamination, unsuitable moisture exposure, and physical damage.
The supplier and logistics provider should confirm the appropriate handling conditions.
No universal shelf life should be assumed without supporting data.
Supplier Documentation
Buyers may request:
- Product specification sheet.
- Supplier declaration.
- Lot-specific quality results.
- Laboratory reports where available.
- Origin information.
- Packing list.
- Inspection records.
- Export documentation where applicable.
Availability must be confirmed with the actual supplier.
Acceptance and Rejection Criteria
The purchasing specification should state which results constitute acceptance or rejection.
The contract should also establish the sampling procedure, inspection timing, retesting arrangements, and handling of disputed lots.
Health and Regulatory Considerations
Areca nut chewing is carcinogenic to humans, including without tobacco.
A technical specification does not establish safety for consumption or legality of importation.
Buyers must verify the intended use, destination-market restrictions, and applicable health disclosures.
Frequently Asked Questions
Is this template a Certificate of Analysis?
No. It is a procurement specification template.
Is 15–20% moisture a guaranteed supplier specification?
No.
Can buyers modify the technical requirements?
Yes, subject to applicable law and supplier capability.
Should every shipment have lot identification?
Lot identification is an important traceability control and should be agreed where appropriate.
Can IEC request supplier test reports?
IEC can coordinate requests for available records.
Does a specification sheet replace laboratory testing?
No.
Request a Supplier Technical Specification
Technical procurement teams may contact IEC with their required quality parameters and documentation checklist.
REQUEST DRIED ARECA NUT TECHNICAL INFORMATION
INDONESIA EXPORT CENTER
Connecting Indonesian Products to Global Markets
Website: https://indonesiaexportcenter.com/
WhatsApp: +62 813-3302-277
Related Technical Guides
Areca Nut Moisture Content and Quality
Areca Nuts Grades and Sorting Guide
Areca Nut Size and Defect Inspection
