IEC | INDONESIA EXPORT CENTER
COCONUT SHELL ACTIVATED CARBON TDS AND COA REQUIREMENTS
Supplier Prequalification | Technical Specifications | Batch Testing | International B2B Procurement
Understanding Activated Carbon Technical Documentation
International buyers need reliable technical information before approving an activated carbon supplier.
Two important documents commonly requested during procurement are the Technical Data Sheet (TDS) and the Certificate of Analysis (COA).
Although these documents are related, they serve different purposes.
A TDS generally describes the product and its stated technical characteristics.
A COA reports analytical results associated with a specific product sample or production lot, depending on how it has been issued.
Indonesia Export Center (IEC) facilitates sourcing inquiries and technical-document requests for buyers evaluating potential Indonesian suppliers of coconut shell activated carbon.
What Is a Technical Data Sheet?
A Technical Data Sheet provides information about the product’s identity, intended applications, and technical characteristics.
It may include typical properties, specification ranges, test methods, and handling information.
A TDS is useful during preliminary supplier evaluation, but it does not necessarily demonstrate that a particular shipment meets every requirement.
What Is a Certificate of Analysis?
A Certificate of Analysis reports analytical information for an identified sample or batch.
Buyers should verify whether the COA refers to:
- A representative sample.
- A production lot.
- A specific commercial shipment.
- A historical batch.
- A generic example.
These distinctions matter.
A sample COA should not be presented as proof of the quality of a different commercial batch.
TDS vs COA
| Item | Technical Data Sheet | Certificate of Analysis |
|---|---|---|
| Main Purpose | Product characterization | Report analytical results |
| Product Grade | Identified | Identified |
| Typical Specifications | Common | May include acceptance limits |
| Actual Test Results | Not always | Expected for reported tests |
| Batch Identification | Not always | Important for batch-based COA |
| Test Methods | Should be stated | Should be stated |
| Procurement Use | Preliminary qualification | Quality verification |
| Shipment Relevance | General product | Depends on lot traceability |
Recommended TDS Fields
A useful activated carbon TDS may include:
- Manufacturer name.
- Product name and grade.
- Raw material.
- Product form.
- Intended applications.
- Particle-size classification.
- Iodine number.
- Moisture.
- Ash.
- Apparent density.
- Hardness or abrasion data.
- pH where relevant.
- Additional adsorption characteristics.
- Applicable test methods.
- Packaging information.
- Storage and handling guidance.
- Document revision date.
Not every parameter is relevant to every activated carbon grade.
Recommended COA Fields
| COA Field | Procurement Importance |
|---|---|
| Manufacturer / Laboratory | Identifies source |
| Product Name | Confirms product |
| Grade Code | Prevents grade confusion |
| Batch / Lot Number | Supports traceability |
| Production or Sampling Date | Establishes context |
| Test Date | Identifies testing period |
| Parameter | States what was measured |
| Test Method | Supports interpretation |
| Result | Reports measured value |
| Unit | Prevents ambiguity |
| Acceptance Criteria | Supports conformity review |
| Authorized Approval | Supports document control |
Common Activated Carbon Test Parameters
Iodine Number
Used for specified iodine adsorption characterization.
Moisture
Measures moisture under a defined test procedure.
Ash Content
Reports inorganic residue under a defined method.
Particle-Size Distribution
Shows how granular material is distributed across specified sieves.
Hardness
Characterizes aspects of mechanical durability.
Apparent Density
May be relevant for packaging, bed design, and material handling.
pH
May be important for selected liquid-treatment applications.
Application-Specific Tests
Specialized uses may require gold adsorption, vapor-phase adsorption, extractables, impurity testing, or other relevant measurements.
Why Test Methods Matter
Two reports may list the same parameter but use different procedures.
Buyers should verify whether results are comparable.
Examples of recognized activated carbon test methods include:
- ASTM D4607 for iodine number.
- ASTM D2866 for total ash.
- ASTM D3802 for ball-pan hardness.
The applicable method and current version should be confirmed for the actual procurement specification.
Batch Traceability
For repeat purchases, buyers may require a COA linked to each shipment or production lot.
A traceability system should allow the product received to be connected to its supporting documentation.
Specification Tolerances
A purchasing specification should define acceptable limits.
For example, the buyer may specify a minimum iodine number, maximum moisture, maximum ash, and particle-size tolerances.
These values should be established by the buyer’s technical team rather than invented by the sourcing intermediary.
Product-Specific Documentation
Different applications may require different supporting documents.
| Application | Additional Documentation to Consider |
|---|---|
| Drinking Water | Applicable water-contact compliance evidence |
| Food Processing | Relevant food-contact suitability |
| Gold Recovery | Gold adsorption and abrasion data |
| Air Purification | Relevant gas-phase performance |
| VOC Treatment | Contaminant-specific adsorption and safety data |
| Pharmaceutical Process | Applicable compendial and quality evidence |
| Industrial Water | Application-specific testing |
Supplier Verification Checklist
Before approving a supplier, buyers should confirm:
- Legal manufacturer identity.
- Manufacturing location.
- Product grade.
- Technical documentation.
- Test-method transparency.
- Sample availability.
- Batch consistency.
- Commercial supply capability.
- Export documentation arrangements.
- Contracting party identity.
Common Documentation Problems
Generic COA Without a Lot Number
A generic report may be useful for preliminary evaluation but insufficient for shipment acceptance.
Unclear Test Methods
Results may be difficult to compare without identified methods.
Different Product Codes
The TDS, sample label, quotation, and COA should refer to the same offered grade.
Unsupported Certifications
Certification claims should be verified against the actual product and applicable scope.
Missing Acceptance Limits
A numerical test result has limited procurement value if the buyer has not defined the required specification.
Download-Ready Buyer Specification Checklist
Copy and complete the following template before contacting potential suppliers.
ACTIVATED CARBON TECHNICAL SPECIFICATION REQUEST
Buyer Company: [Company Name] Destination Country: [Country] Application: [Application] Required Raw Material: [Coconut Shell] Product Form: [GAC / PAC / Other] Required Mesh: [Specification] Sieve Standard: [Standard] Minimum Iodine Number: [mg/g] Maximum Moisture: [%] Maximum Ash: [%] Hardness Requirement: [Method and Value] Apparent Density: [Range] pH: [Range, if applicable] Specific Impurity Limits: [Details] Additional Tests: [Details] Required Certifications: [If applicable] Required COA Basis: [Batch / Lot] Sample Quantity: [Amount] Commercial Quantity: [MT] Packaging: [Requirement] Destination Port: [Port] Incoterm: [Term]
IEC Supplier Qualification Support
IEC may facilitate:
- Initial technical inquiry.
- Supplier introduction.
- TDS request.
- COA request.
- Sample coordination.
- Clarification of technical differences.
- Commercial quotation request.
- Communication concerning shipment documentation.
IEC does not independently certify test results unless a separate verification process is arranged.
Formal TDS and COA RFQ
Subject: Coconut Shell Activated Carbon – TDS, COA and Supplier Qualification
Dear IEC Team,
We are evaluating Indonesian coconut shell activated carbon suppliers.
Please assist with identifying potential suppliers that can provide product-specific technical documentation and commercial information.
Our requirements are:
Application: [Description] Grade: [Requirement] Mesh: [Specification] Iodine Number: [mg/g] Moisture: [%] Ash: [%] Additional Tests: [Details] Required Documentation: [TDS / Batch COA / Other] Sample Quantity: [Amount] Order Quantity: [MT] Destination: [Port / Country] Incoterm: [Term]
Please confirm available documentation, sample arrangements, MOQ, and quotation procedures.
Best regards,
[Name]
[Company]
Frequently Asked Questions
What is the difference between a TDS and COA?
A TDS describes the product, while a COA reports analytical results associated with an identified sample or lot.
Does a TDS prove shipment quality?
Not by itself.
Should every shipment have a batch COA?
This depends on the agreed quality and contractual requirements.
Can a generic COA be used for final acceptance?
It may be insufficient if the buyer requires batch-specific evidence.
Can IEC request third-party testing?
IEC can facilitate discussion of independent inspection or testing arrangements, subject to availability and agreement.
Does IEC guarantee product compliance?
No. Compliance must be established through appropriate evidence.
Request Activated Carbon TDS and COA
REQUEST TDS, COA AND SUPPLIER INFORMATION
INDONESIA EXPORT CENTER
Connecting Indonesian Products to Global Markets
Website: https://indonesiaexportcenter.com/
WhatsApp: +62 813-3302-277
Related Resources
Coconut Shell Activated Carbon Samples and COA
Coconut Shell Activated Carbon Iodine Number Guide
Coconut Shell Activated Carbon Supplier in Indonesia
