PFAD Gardner Colour Specification: Maximum 7 Reference, Laboratory Testing and Buyer Acceptance

IEC | INDONESIA EXPORT CENTER

Your Global Sourcing Partner

Understanding Gardner Colour in Palm Fatty Acid Distillate

Colour is one of the physical quality characteristics that industrial buyers may review when evaluating Palm Fatty Acid Distillate.

For chemical manufacturers, quality assurance laboratories, and formulation teams, colour can provide useful information about material appearance and consistency.

However, visual colour assessment alone cannot establish the chemical quality, purity, or suitability of PFAD.

The IEC PFAD product brochure identifies Gardner colour maximum 7 as a reference specification.

This reference should be verified using an agreed laboratory method before being incorporated into a binding purchase specification.

Indonesia Export Center (IEC) facilitates potential Indonesian PFAD supplier inquiries and does not independently guarantee colour compliance.

What Is Gardner Colour?

Gardner colour is a standardized colour measurement scale used for certain transparent liquids and related materials.

It allows colour to be assessed using specified laboratory procedures.

A Gardner result is meaningful only when the appropriate test method and sample conditions are used.

For PFAD, which may be solid or semi-solid under some conditions, suitable sample preparation and method applicability are especially important.

Why Colour Matters to Industrial Buyers

Raw Material Consistency

Colour may be monitored as part of routine incoming quality control.

Downstream Product Appearance

Some manufacturing applications have strict appearance requirements.

Supplier Comparison

An agreed measurement method can support comparison between samples.

Quality Documentation

A defined colour specification may be included in a COA.

Commercial Acceptance

A clear acceptance criterion helps reduce disputes.

IEC PFAD Reference Specification

Parameter Reference
FFA, as Palmitic Minimum 90%
Moisture & Impurities Maximum 1.0%
Iodine Value Maximum 50
Melting Point 36–46°C
Gardner Colour Maximum 7
Appearance White / Off White Solid

These are reference values only.

What Does Gardner Maximum 7 Mean?

The brochure’s maximum 7 reference indicates an intended upper colour limit on the Gardner scale.

However, the actual acceptance result depends on the agreed method, sample preparation, and laboratory procedure.

A photograph cannot reliably establish Gardner colour compliance.

Gardner Colour vs Visual Appearance

A product may appear white or off-white when solid but show a different visual appearance when prepared for a liquid-phase colour test.

Therefore, appearance and Gardner colour should be treated as separate specification parameters.

Buyers should not infer one directly from the other.

Laboratory Testing Considerations

A suitable colour assessment procedure should address:

  1. Method applicability.
  2. Sample preparation.
  3. Test temperature.
  4. Sample clarity.
  5. Measurement equipment.
  6. Calibration.
  7. Result reporting.
  8. Acceptance limits.

Recognized Gardner colour methods may include appropriate ASTM or equivalent procedures, subject to the laboratory confirming suitability for the PFAD sample.

Why Colour Results May Differ

Potential causes include:

  • Different test methods.
  • Inconsistent sample preparation.
  • Different sample temperatures.
  • Product composition.
  • Contamination.
  • Sampling variability.
  • Laboratory equipment differences.

These factors should be considered before concluding that a supplier has delivered off-specification material.

Colour and Chemical Quality

Colour should not be treated as a universal measure of:

  • FFA content.
  • Moisture.
  • Impurities.
  • Oxidation.
  • Fatty acid composition.
  • Product purity.
  • Processing performance.

These characteristics require their own tests.

Buyer Acceptance Procedure

Step 1 – Specify Gardner Maximum 7

Use the reference only if appropriate for the intended application.

Step 2 – Agree on the Method

Identify the required analytical procedure.

Step 3 – Confirm Sample Preparation

Establish how the material will be tested.

Step 4 – Obtain a Relevant COA

Review the reported result.

Step 5 – Arrange Independent Testing

Use an agreed laboratory where necessary.

Step 6 – Define Dispute Resolution

Document retesting and acceptance procedures in the contract.

Supplier Questions

  • What is the current Gardner colour result?
  • Which test method was used?
  • How was the PFAD sample prepared?
  • Is the result linked to the offered cargo?
  • Can a current COA be provided?
  • Is an independent test available?
  • What is the material’s visual appearance at the specified temperature?
  • Are colour and appearance separately reported?

PFAD Gardner Colour RFQ

Subject: PFAD Gardner Colour Maximum 7 – Supplier Inquiry

Company: [Name]

Country: [Country]

Product: Palm Fatty Acid Distillate

Required Quantity: [MT]

Gardner Colour: Maximum 7

Test Method: [Specify]

Sample Preparation: [Specify]

Appearance: [Required Description]

FFA: [Minimum, as Palmitic]

Moisture & Impurities: [Maximum]

Destination Port: [Port]

Preferred Incoterm: [Term]

Please provide relevant analytical documentation and potential supplier information.

Frequently Asked Questions

What is the IEC PFAD Gardner colour reference?

Maximum 7.

Is Gardner colour the same as product appearance?

No. They are separate quality characteristics.

Can a photograph prove Gardner compliance?

No. Controlled laboratory assessment is needed.

Does Gardner maximum 7 guarantee product purity?

No. Chemical purity requires separate analysis.

Can buyers request independent colour testing?

Yes, subject to agreement.

Is the reference suitable for every PFAD application?

Not necessarily. Buyers should determine their own requirements.

Request PFAD Colour and Quality Documentation

Looking for Indonesian PFAD with defined colour and appearance requirements?

Share your specifications and sourcing requirements with IEC.

REQUEST PFAD TECHNICAL INFORMATION

IEC | INDONESIA EXPORT CENTER

Website: https://indonesiaexportcenter.com/

WhatsApp: +62 813-3302-277

Related Resources

PFAD Supplier Indonesia

PFAD Technical Specifications

PFAD COA and Quality Verification

 

Leave a Reply

Your email address will not be published. Required fields are marked *