IEC | INDONESIA EXPORT CENTER
INDONESIAN THERMAL COAL – GAR 3400
Low-Calorific-Value Coal Sourcing | Technical Verification | International Procurement
Indonesian Coal GAR 3400 for International Buyers
International coal importers searching for Indonesian coal GAR 3400 are generally evaluating low-calorific-value thermal coal for power generation, industrial combustion, or other applications where the fuel specification permits a relatively low heating value.
A nominal GAR 3400 requirement refers to a gross calorific value of approximately 3,400 kcal/kg on an as-received basis.
However, a calorific-value number alone is insufficient to determine whether a coal is suitable for a particular boiler, power plant, or industrial operation.
Total moisture, inherent moisture, ash, sulfur, volatile matter, particle size, and other parameters must also be evaluated.
Indonesia Export Center (IEC) facilitates inquiries between international buyers and potential Indonesian coal suppliers.
Availability notice: This page describes a buyer-requested coal category. It does not establish that GAR 3400 coal is currently available from an IEC-associated supplier. Publication as an available product requires a genuine, relevant supplier COA and separate confirmation of cargo availability, origin, and export eligibility.
What Does GAR 3400 Mean?
GAR stands for Gross As Received.
It expresses gross calorific value using the coal’s condition as received, including its moisture content.
A specification described as GAR 3400 should therefore be interpreted as a target heating-value category, not a complete product grade.
The contract should identify the required analytical method, tolerance, sampling procedure, and treatment of results that fall outside the agreed specification.
Why Buyers Consider Low-Calorific-Value Coal
Some power and industrial facilities are designed to accommodate lower-heating-value fuels.
Potential procurement considerations include fuel cost, boiler compatibility, fuel-handling capability, ash management, and environmental compliance.
A lower GAR value generally means that more coal mass may be required to deliver a given amount of gross thermal energy compared with a higher-GAR fuel.
Actual operating performance depends on plant design and fuel characteristics.
GAR 3400 Technical Specification Worksheet
| Parameter | Buyer Requirement | Supplier Verification |
|---|---|---|
| Product | Thermal Coal | Confirm |
| Target GAR | 3,400 kcal/kg | Actual COA required |
| NAR | Buyer-defined | Laboratory result |
| Total Moisture (TM) | Maximum to specify | Laboratory result |
| Inherent Moisture (IM) | To specify | Laboratory result |
| Ash | Maximum to specify | Laboratory result |
| Total Sulfur | Maximum to specify | Laboratory result |
| Volatile Matter | Required range | Laboratory result |
| Fixed Carbon | If required | Laboratory result |
| HGI | Plant-specific | Laboratory result |
| Particle Size | Required range | Inspection |
| Ash Fusion | If required | Laboratory result |
| Coal Origin | Indonesia, subject to proof | Source documents |
| Available Quantity | To specify | Seller confirmation |
No moisture, sulfur, ash, or other analytical result is represented as verified by this table.
Total Moisture and Inherent Moisture
Total Moisture (TM) describes moisture measured according to the applicable analytical procedure.
Inherent Moisture (IM) is a different measurement associated with moisture retained in the coal under specified laboratory conditions.
The two values should not be confused or treated as interchangeable.
For low-calorific-value coal, moisture may significantly affect handling, transportation economics, and effective energy content.
Ash and Sulfur Requirements
Ash represents the inorganic residue remaining after combustion under specified test conditions.
Total sulfur is relevant to fuel characterization and sulfur oxide emissions.
A GAR 3400 coal offer should not be accepted solely on calorific value if the ash or sulfur levels exceed the buyer’s plant or regulatory limits.
Coal Sizing and Handling
Buyers should identify the required particle-size distribution and any limits on oversized material or fines.
Coal sizing affects handling systems, storage, feeding equipment, and combustion performance.
The seller should confirm whether the requested sizing can be provided and verified.
Certificate of Analysis Requirements
A genuine supplier COA should identify:
- Coal sample identification.
- Sampling date.
- Source or lot reference.
- Laboratory or surveyor.
- Analytical standards.
- Gross calorific value and basis.
- Moisture results.
- Ash content.
- Sulfur content.
- Other agreed quality parameters.
Historical or unrelated COAs should not be represented as evidence of current GAR 3400 inventory.
Import Considerations for China and India
Buyers in China and India should verify current import rules, customs classification, applicable coal-quality or environmental requirements, and the eligibility of the proposed transaction.
Import permission and commercial viability should not be inferred from historical trade activity.
FOB, CFR and CIF Quotation Options
Depending on the seller’s actual capabilities, buyers may request quotations using FOB, CFR, or CIF terms under Incoterms 2020.
Each offer should identify the named port, included costs, shipment schedule, and contracting seller.
Buyer RFQ – GAR 3400
Subject: Indonesian Thermal Coal GAR 3400 Supplier Inquiry
Dear IEC Team,
We are evaluating potential Indonesian suppliers for low-calorific-value thermal coal.
Buyer Company: [Name]
Destination Country: [China / India / Other]
Target GAR: 3,400 kcal/kg
Total Moisture Maximum: [Value]
Inherent Moisture: [Value]
Ash Maximum: [Value]
Total Sulfur Maximum: [Value]
Required Sizing: [Range]
Shipment Quantity: [MT]
Contract Duration: [Period]
Destination Port: [Port]
Preferred Incoterm: [FOB / CFR / CIF]
Payment Proposal: [Method]
Required Inspection: [Details]
Please advise whether a qualified supplier can provide a relevant COA, evidence of source and availability, and a seller-issued commercial quotation.
Best regards,
[Name]
[Company]
Frequently Asked Questions
Is GAR 3400 coal currently available through IEC?
Availability has not been verified.
Does GAR 3400 indicate net calorific value?
No. GAR is a gross as-received measurement.
Can GAR 3400 coal be used in any power plant?
No. Equipment compatibility must be evaluated.
Does a COA establish current cargo availability?
Not by itself.
Can IEC coordinate a supplier inquiry?
IEC can facilitate relevant inquiries, subject to supplier capability.
Can buyers request FOB or CIF pricing?
They may request these terms, but the seller must confirm the available arrangements.
Request Verified GAR 3400 Availability
REQUEST GAR 3400 SUPPLIER VERIFICATION
INDONESIA EXPORT CENTER
International Coal Sourcing Facilitation
Website: https://indonesiaexportcenter.com/
WhatsApp: +62 813-3302-277
Related Guides
Coal Procurement from Indonesia
